Pol-E-Flake is produced in our factory in Muskogee. 

Pol-E-Flake®

Download Information
 Other Downloads- Intertek Report
Pol-E-Flake SDS

Pol-E-Flake is inert and may be used in any common drilling fluid or cement system as a preventive filler while drilling a potential loss zone, and may be used in combination with other lost circulation products to make a remedial plugging slurry.

Performance Benefits:

  • Produces maximum mat sealing at the face of the well bore wall
  • Made from polyester film sized to 3/8”
  • About half the density of the most common cellophane flakes
  • Lends itself very well to dry blending
  • Will not cause the pump to cavitate

Pol-E-Flake is a lost circulation product made from polyester film that has been sized to 3/8". Pol-E-Flake is a superior substitute for more expensive cellophane flakes and produces maximum mat sealing at the face of the well bore wall.

Application:
Pol-E-Flake is inert and may be used in any common drilling fluid or cement system.  It may be used in the mud system as a preventive filler while drilling a potential loss zone, and may be used in combination with other lost circulation products to make a remedial plugging slurry.

Advantages:
Pol-E-Flake is about half the density of the most common cellophane flakes. Pol-E-Flake lends itself very well to dry-blending. Pol-E-Flake will not cause the pump to cavitate.

Recommended Loading:
Using the above information along with experiences from the field, we have determined that the recommended loading for Pol-E-Flake should be 2 to 4 ounces (1/8 to 1/4 pound) per sack of cement. Pol-E-Flake is about half the density of most cellophane products on the market and performs very well at these recommended levels.

Physical Properties:

Appearance: Clear, Flat Flakes
Density: 10 lb/cubic foot
Toxicity: None, Non-toxic
Color: Transparent/Translucent
Grade: 3/8 inch grind